Holzmann TS 250F-1600 User Manual page 43

Angle cuts with miter gauge
In table boom two angular scales are integrated, so that the miter fence can be set exactly in
both directions of pivot up to 45 °. Workpiece fixation by means of retainers.
Angle cuts with crosscut fence
For smaller workpieces, the angle stop is sufficient. Set the angle stop on the desired degree of
tilt fix. Create workpiece clamping with low-holder.
HOLZMANN Maschinen Austria www.holzmann-maschinen.at
Formátovací pila / panel saw TS 250F-1600
Strana 43