Page 5
K tomu potřebujete mít přesné úhlové pravítko nebo precizní přístroj 7 ÚDRŽBA na měření úhlů. Bruska HOLZMANN TS 305 má malé nároky Nastavení stolu na údržbu. Uvolněte zajišťovací páku a přiložte úhelník 90° Před zahájením údržby a čištění stroj vždy na brusný...
Tel.: +43 (0) 7289 61 116 503 3 PROPER USE Fax.: +43 (0) 7289 61 116 520 info@holzmann-maschinen.at The HOLZMANN TS 305 disc sander is designed for sanding small workpieces of wood and wood MO-FR 8:00-12:00 13:00-17:00 GMT +1 composites.
Always check prior to every use the fixing screws and levers to be The TS 305 shall be used only by fastened tightly. trained personnel. Non authorized personnel, espe- cially children, shall be kept away...
Swing and fasten the already adjusted sanding the power supply. table into 90° position. Now bring the angle gauge The HOLZMANN TS 305 is quasi maintenance into 90° position to the sanding table and check free.! on the angle index if it matches exactly. If not , readjust the angle index.
Install the new sanding disc paper correctly. Install the sanding table 8 STORAGE Store the HOLZMANN TS 305 in a dry place. Tem- perature should not fall below 5°C or rise above 40°C. SPARE PARTS Request spare parts lists and spare part drawings from your domestic HOLZMANN service partner.