Unpacking The Server; Setting Up The Floorstand Model - PRIMERGY TX300 S3 Operating Manual

Unpacking the Server

4.1 Unpacking the Server
V
CAUTION!
Please note the safety instructions in
page 19.
If you need to lift or transport the server, ask other people to help you.
Do not unpack the server until it is at its installation location.
You should retain the original server packaging in case further transportation is
necessary.
Ê Unpack all individual parts.
Ê Check the delivery for any damage during transport.
Ê Check whether the items delivered match the details on the delivery note.
The identification rating plate is located on the rear area on the server.
Notify your supplier immediately should you discover that the delivery does not
correspond to the delivery receipt.
4.2

Setting up the floorstand model

I
If you are not installing a PRIMERGY TX300 S3 floorstand model, skip
this section and continue reading at section
the Rack Model" on page
V
CAUTION!
Please note the safety instructions in
page 19.
Ê Transport the server to the place where you want to set it up.
Ê Unpack the server (see
32
chapter "Important Information" on
35.
chapter "Important Information" on
section "Unpacking the
Operating Manual
Hardware Installation
section "Installing/Removing
Server").
TX300 S3