Place The Hot-Pluggable Pci Board In The Removal Tool - PRIMERGY TX300 S3 Operating Manual

Hot plug components
8.4.3 Place the hot-pluggable PCI board in the removal
tool
3
Figure 36: Placing the hot-pluggable PCI board in the removal tool
Ê Push the green engaging hooks all the way down until they disengage from
the removal tool (A) (1), and remove them (2).
Ê Place the new PCI board (B) in the opening (C) in the removal tool (3).
Ê Then select one of the guide rails on the removal tool that is in contact with
a point on the PCI board where there are no plugs. Insert a green engaging
hook (D) in the guide rail and push it down until it snaps into place on the top
edge of the PCI board (4).
Ê Repeat this procedure with the other engaging hooks (D).
TX300 S3
1
1
2
2
B
C
Operating Manual
Hot-pluggable PCI boards
1
2
A
D
4
4
4
103