Unable To Read From / Write To Floppy Disk; Incorrect Date And Time - PRIMERGY TX300 S3 Operating Manual

Unable to Read From / Write To Floppy Disk

Mouse controller disabled
The mouse controller on the system board must be enabled if you are using the
mouse supplied.
Ê Check in the BIOS Setup that the mouse controller is Enabled.
7.7 Unable to Read From / Write To Floppy Disk
Ê Check whether the write protection for the floppy disk is activated.
Ê Check the entry for the floppy disk drive in the BIOS Setup.
Ê Check in the BIOS Setup whether the floppy disk drive controller and write
permission are enabled (see technical manual for system board on the
PRIMERGY ServerBooks DVD).
7.8

Incorrect Date and Time

Ê Set the time and/or date in the operating system or in BIOS Setup.
I
If the time and date are repeatedly wrong when you switch on your
server, you must change the lithium battery. Contact our Service group.
82 Operating Manual
Troubleshooting and Tips
TX300 S3