Hardware Installation - PRIMERGY TX300 S3 Operating Manual

4

Hardware Installation

V
CAUTION!
Please note the safety instructions in
page 19.
Do not expose the server to extreme environmental conditions (see
section "Technical data" on page
heat.
The HDD modules installed in the server may not be exposed to a
temperature shock (see
Modules" on page
In order to avoid the formation of condensation inside or on the outside
of the hard disk drives the server must be acclimatized in its operating
environment for an acclimatization time
Temperature difference (°C)
5
10
15
20
25
30
Table 1: Acclimatization time
I
The temperature difference in
the operating temperature and the outside, transport or storage temper-
ature.
TX300 S3
14). Protect it from dust, humidity, and
section "Handling Hard Disk Drives/HDD
90).
Minimum acclimatization time (hours)
table 1
Operating Manual
chapter "Important Information" on
(table 1).
3
5
7
8
9
10
represents the difference between
31