Table of Contents
Advertisement
Factory Default
The System Administration - Factory Default screen is used to reset the multinode to its
factory settings. You must be logged in as the CryptoOfficer to access the Restore
button.
ATTENTION
The "Restore" button is a fallback troubleshooting function that should be
used only to reset the multinode to its factory default settings.
Remote logging
The System Administration -Remote Logging screen allows you to forward the system
log data from each multinode to a central remote logging server. If you enable Remote
Logging, enter the IP addresss for the System Log Server and the System Log Server
Port. Click Apply to accept these values.
Reboot
The System Administration - Reboot screen allows you to reboot the multinode without
changing any preset functionality. Both CryptoOfficer and Administrator users have
access to this function.
Utilities
The System Administration - Utilities screen gives you access to two useful utilities: Ping
and Traceroute. Simply enter the IP Address or hostname you wish to ping or traceroute
and click either the Ping or Traceroute button, as appropriate.
R110
6/08
OneWireless Multinode User's Guide
Configuration
System Administration
69
Advertisement
Table of Contents
