Agency Compliance Information; Compliance Statements And Restrictions; Fcc Compliance Statements; Ic Compliance Statements - Honeywell OW-CDX050 User Manual

Agency compliance information

This section contains agency compliance information for Honeywell's OneWireless
Multinode. For additional details on compliance information, see also the OneWireless
Multinode Agency Compliance Professional Installation Guide.

Compliance statements and restrictions

This section contains the Federal Communications Commission (FCC), Industry Canada
(IC) and Radio Frequency compliance statements for the OneWireless Multinode device.

FCC compliance statements

•
This device complies with Part 15 of FCC Rules and Regulations. Operation is
subject to the following two conditions: (1) This device may not cause harmful
interference and (2) this device must accept any interference received, including
interference that may cause undesired operation.
•
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radiofrequency energy
and, if not installed and used in accordance with these instructions, may cause
harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at their own expense.
•
Intentional or unintentional changes or modifications must not be made to the
Multinode unless under the express consent of the party responsible for compliance.
Any such modifications could void the user's authority to operate the equipment and
will void the manufacturer's warranty.

IC compliance statements

•
To reduce potential radio interference to other users, the antenna type and its gain
should be so chosen that the equivalent isotropic radiated power (EIRP) is not more
than that permitted for successful communication.
•
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
•
This Class A digital apparatus complies with Canadian ICES-003.
•
French: Cet appareil numérique de la classe A est conforme à la norme NMB-
003 du Canada.
R110
6/08
OneWireless Multinode User's Guide 5