About this Guide
Purpose
If you want to...
Set up a wireless mesh and between
multinodes and wireless networks
Monitor multinode/WSG operation
Replace a multinode or WSG
Troubleshoot a multinode/ WSG fault
Related documents
The following documents provide supporting information for setting up and
commissioning a wireless network.
•
Getting Started with Honeywell OneWireless Solution, Document OW-CDX010 -
provides a brief description of what to do when setting up a wireless network.
•
OneWireless Planning Guide, Document OW-CDX030 - provides site planning
information.
•
OneWireless System Administration Guide, Document OW-CDX040 - Provides
guidance for the commissioning and administration of a OneWireless system.
•
OneWireless Builder User's Guide, Document OW-CDX060 - Describes the use of
the Wireless Builder application for device node identification and configuration.
•
OneWireless Builder Parameter Reference, Document OW-CDX070 - A reference
containing definitions of the user-visible parameters for defining wireless devices in
the system.
•
OneWireless Field Device manuals, various documents - describes the function and
use of the various wireless field devices (sensors) that can be employed in the
system.
•
OneWireless Field Network Dictionary, Document OW-CDX020 - A glossary of
terms and abbreviations used in the wireless system.
On-line help support is available when using Wireless Builder.
2
OneWireless Multinode User's Guide
See...
Setting up wireless networks
Multinode operation and Monitoring
page 97.
Multinode Maintenance
on page 111.
Troubleshooting
on page 113.
on page 82.
on
R110
6/08