Table of Contents
Advertisement
Multinode Operation and Monitoring
Monitoring/Reports screens
Mesh Site Map
Click on the Mesh Site Map at the left of the screen to call up the Monitoring Reports -
Mesh Site Map screen.
The Mesh Site Map shows the spanning tree network topology of both the wired and
wireless nodes connected to the network. The root STP node is always shown on top with
the other nodes shown in hierarchial tree below it. Wired links are shown with double
dotted lines and wireless links are shown with single dotted lines. To refresh the map you
must click the Update button since the map does not update dynamically. An example is
shown in Figure 14. Table 20 describes the statisitics that are shown for each node
defined in the network.
Statistic or Feature
Update button
Last Update:
Current Time:
Retrieve button
Cached Nodes Info button
Information for each node detected in the
Mesh
108
Table 20 Mesh Site Map screen statistics
OneWireless Multinode User's Guide
Description
Click this button to update the Mesh Site
map with current information.
The time that the mesh site map was last
updated.
The current system time.
Click this button to retrieve missing
network node information.
BRG:
Bridge ID
IP:
The IP address
Radio:
The MAC address of the
radio interface.
Desc:
The node's Description field
text
Built:
The build date of the
firmware currently loaded
and operating in the
multinode.
R110
6/08
Advertisement
Table of Contents
