Table of Contents
Advertisement
Step
6
Choose the Tx Pwr Mode from the drop down menu.
Note: The Tx Pwr Mode can be set to AUTO unless the power must be
regulated. If FIXED is selected, you then must choose the Fixed Power Level
from the drop down menu. See Table 11 for more information.
7
Choose the Propogation Distance from the drop down menu.
Note: This field is set based on the distance between a mesh node and the
furthest mesh node that is connected to it.
8
Choose the RTS Threshold. See Table 11 for more information on this
option.
9
Choose the value for Beacon Interval. See Table 11 for more information on
this option.
10
After you have entered the information in the fields, click Apply to accept the
values.
11
Enter a descriptive note to identify the remote mesh node or its location.
12
Click Add button.
Select mesh mode:
Step
1
Click on the Wireless Mesh - General at the left of the screen to call up the
General configuration screen.
2
Select either Manual Mesh or Auto Mesh. The screen will refresh according
to the Mesh mode that was selected.
•
3
If Auto Mesh is selected, go to
follow the procedure.
•
If Manual Mesh is selected, go to
follow the procedure.
R110
6/08
Action
Action
Complete Auto Mesh
OneWireless Multinode User's Guide
Wireless Mesh Configuration
Setting up wireless networks
on page 88 and
Complete Manual Mesh
on page 89 and
87
Advertisement
Table of Contents
