Table of Contents
Advertisement
The Multinode/Wireless System Gateway
Multinode specificiations
Specification
Receive Sensitivity:
RF Output Power:
Environmental:
Mulitnode communications radios
The multinode contains three radios that are used for RF communications; two IEEE
802.11 radios (a client radio and a mesh radio), and one radio which is used to
communicate with the wireless field devices (field I/O radio).
•
One 802.11 radio (client or AP radio) is used for communication when the multinode
is configured to operate as an access point or WSG. Radio activity is indicated by the
WLAN1 LED on the multinode enclosure.
•
One 802.11 radio (mesh radio) is used with multinodes and WSGs when
implementing a wireless mesh. Mesh radio activity is indicated by the WLAN2 LED
on the multinode enclosure.
20
10/100 Mbps auto negotiation
802.11a: -87dB@6Mbps to -71dB@54Mbps
802.11b: -94dB@1Mbps to -90dB@11Mbps
802.11g: -87dB@6Mbps to -74dB@54Mbps
802.11a/b/g: +20dBm, maximum
Note: Maximum transmit power will vary by antenna
selection, channel selection, data rate and region,
(Country Code).
Standard Temperature Model:
Operating Temperature: -20º to +60º C
(-40º to +140º F)
Extended Temperature Model:
Operating Temperature: -40º to +75º C
(-40º to +167º F)
Other:
Storage Temperature: -40º to +85º C (-40º to +185º F)
Humidity: 0 to 100% noncondensing
EMI/Safety: FCC Class A
Lightning and surge suppressor kits (optional)
OneWireless Multinode User's Guide
Description
R110
6/08
Advertisement
Table of Contents
