Onewireless Network Topology; Figure 1 Honeywell's Onewireless Solution For Wireless Network For Secure Industrial Applications (Wnsia) - Honeywell OW-CDX050 User Manual

OneWireless System
Overview
NOTE: The Key Server and Wireless Builder are installed on the OneWireless Server.
Figure 1 Honeywell's OneWireless solution for Wireless Network for

OneWireless Network topology

Honeywell uses a wireless mesh network to achieve the OneWireless solution. A mesh
network provides multiple RF communication paths between multinodes and Wireless
System Gateways to transfer data to and from the wireless field devices. For example, in
Figure 1 the WSG is connected to the wired network of the control system. Four
multinodes are operating as Access Points (APs), communicating with the field devices
and the WSG. Each multinode also is communicating with the other multinodes to form
a mesh network. Multiple communications paths are also made between any field
device and the WSG via any multinode in the network. Wi Fi clients can connect to the
network via the multinode access points.
4
Secure Industrial Applications (WNSIA)
OneWireless Multinode User's Guide R110
6/08