Table of Contents
Advertisement
Configuration
Services Settings
Step
4
Enter a valid IP address in the Source field as the address where information
is accessed.
5
Select the type of Access Control from the drop down menu that defines the
permitted level of management interaction. (Set, Get and Trap)
6
If using Secure user configuration settings (SNMPv3):
•
Enter a User name (minimum of 8 characters)
•
Select from the drop down menu an Authentication type and enter a
password
•
Select from the drop down menu the Encryption type and enter a
password. Note: DES encryption type is recommended.
This configuration information also must be entered when setting up the
Network Management and Diagnostics application.
7
Enter System Information in the following fields.
•
Location
•
Contact
•
EngineID
8
Once you have selected the options in this screen, click Apply.
62
Action
OneWireless Multinode User's Guide
R110
6/08
Advertisement
Table of Contents
