Security Screen - Honeywell OW-CDX050 User Manual

Configuration
Wireless Access Point Configuration
Configuration
Option
Preamble
Broadcast SSID

Security screen

The Wireless Access Point - Security screen displays the default factory setting of no
encryption, but encryption must be set by the CryptoOfficer for the multinode to
communicate with any client. There are three different encryption options available for
access points.
•
None
•
Static WEP
•
802.11i and WPA
None - No Encryption (Not Recommended)
You can choose to have no encryption of wireless communications within the network
although it is not recommended. Although no encryption is the default setting, you must
manually select None and click Apply to operate the WSG without encryption. You will
be prompted if you want to operate the WSG in Bypass mode. If you answer Yes, no
encryption is applied.
52
Range/
Value
Basic Rates for 802.11g -
1, 2, 5.5, 11, 6, 12, 24 Mbps or 1, 2, 5.5, 11 Mbps
Basic Rates for 802.11a -
6, 12, 24 Mbps
Short/Long Specifies whether frames are transmitted using
Preamble a short or long preamble.
Enabled/ Enabled - the SSID is broadcast by the access
Disabled point.
When disabled, the SSID is embedded in
outgoing beacon frames so that stations cannot
obtain the SSID through passive scanning.
Also, the AP doesn't send probe responses to
probe requests with unspecified SSIDs.
(Wired Equivalent Privacy)
(Wi-Fi Protected Access)
OneWireless Multinode User's Guide
Description
R110
6/08