Table of Contents
Advertisement
Purpose
This guide describes the configuration, installation and integration of the
Multinode/Wireless System Gateway (WSG) and associated equipment as part of the
Honeywell's OneWireless network solution for industrial applications.
Intended Audience
This guide is intended for people who are responsible for configuring and installing the
Honeywell wireless components, monitoring and maintaining these components
operating in a wireless network, or those that need to add a new device to an existing
system. Some experience and understanding of wireless networks is helpful when using
this document.
ATTENTION
Multinodes must be professionally installed in accordance with the
requirements specified in the OneWireless Multinode Agency Compliance
Professional Installation Guide.
How to use this guide
Information in this guide is arranged according to the task that you want perform and is
listed in the following table:
If you want to...
Learn more about the multinode/wireless
system gateway (WSG)
Understand the installation tasks for
multinode/WSG installation
Set the operating mode on the
multinode/WSG
Select the security option for the
multinode/WSG
Update the multinode's firmware
R110
6/08
About this Guide
OneWireless Multinode User's Guide
See...
The Multinode/Wireless System Gateway
on page 13.
Installation Overview
on page 23.
System Configuration - Operating Mode
on page 45.
Security screen
on page 52.
System Administration - System
Upgrade
on page 65.
1
Advertisement
Table of Contents
