Honeywell OW-CDX050 User Manual page 91

Screen Field
Tx Pwr
Mode
The default mode is Auto which provides the widest range of RF transmission
available under ambient conditions. The wireless mesh's broadcast range can be
limited by setting the Tx Pwr Mode to Fixed and choosing a Fixed Pwr Level between
1 and 8. To prevent any RF transmission from the wireless mesh, set the Tx Pwr
Mode to Off.
RF transmissions from any associated wireless devices will not be turned off, but the
devices will not be able to communicate with the wireless mesh when Tx Pwr Mode is
set to Off.
Fixed Pwr
Level
Propagation
Distance
RTS
Threshold
R110
6/08
Option
For wireless mode option 802.11a
52 (5.26 GHz)
56 (5.28 GHz)
60 (5.30 GHz)
64 (5.32 GHz)
149 (5.745 GHz)
153 (5.765 GHz)
157 (5.785 GHz)
161 (5.805 GHz)
165 (5.825 GHz)
Off, Fixed, Auto
1, 2, 3, 4, 5,6 7, 8
< 5 Miles
5-10 Miles
11-15 Miles
16-20 Miles
21-25 Miles
26-30 Miles
> 30 Miles
Range 1-2346
OneWireless Multinode User's Guide
Wireless Mesh Configuration
Wireless Mesh screens
Description
Sets the channel frequency for the
wireless mesh.
Sets the RF transmit level of the
multinode.
Sets transmit power level to a fixed
value and is active when Tx Pwr
Mode is set to Fixed.
Level 1 is the lowest power level
(Level 1 = 7dBm) and Level 8 is the
highest power level, (Level
5=15dBm)
Sets the approximate distance
between two mesh nodes.
Set Propagation Distance based on
the distance between this mesh node
and the mesh node that is furthest
from it and in the same network.
The number of bytes used for the
RTS/CTS handshake boundary.
When a packet size is greater than
79