Table of Contents
Advertisement
Lyric Gateway Installation and Reference Guide
Installing the Gateway
Installing
Installing
Installing
the Gateway (Continued)
the Gateway
the Gateway
Connecting the Gateway (Continued)
Connecting the Gateway
Connecting the Gateway
Connecting the Gateway
10. Press the WPS button on the customer's router.
11. Within approximately 3 minutes the Gateway confirms its connection to the Wi-Fi network and exits from
WPS mode. Proceed to "Programming the Lyric Gateway".
12. Change the Wi-Fi setting of the set up device, to the Gateway AP. Select the Gateway SSID,
"OPTGW_####" (#### = Last 4 digits of the Gateway MAC ID#)" from the list of options and select
"Connect". Enter the Gateway's 8-digit, case sensitive, WPA2 password when prompted and select
Connect. (The Gateway SSID and Password are located on the bottom of the Gateway).
13. Open the AlarmNet 360 App on the set up device and select "Manage Lyric Gateway".
14. When prompted enter the Installer Code + "Done" + "Submit.
15. The Transfer Firmware, Transfer Panel Configuration, Configure Panel Wi-Fi and Advanced, options appear.
a.
Select Configure Panel WiFi to connect the Gateway to the customer's router.
Enter the customer's SSID and WPA2 password when prompted.
b.
Select Transfer Firmware to transfer the latest firmware to the Gateway.
c.
Select Transfer Panel Configuration to transfer the panel configuration set up in AlarmNet 360 to the
Gateway.
d.
Select Advanced to access Installer tools. Refer to the Installation and Reference Guide for additional
information.
16 Select "Finish" when configuration is complete.
17. Select "Yes" to exit from the App. The Gateway exits from AP Mode and reconnects to the Wi-Fi network.
18. Select "Proceed to Panel Configuration".
19. Log in to AlarmNet 360.
Communication Modules
Communication Modules
Communication Modules
Communication Modules
The Lyric Gateway supports Central Station reporting using wireless/cellular, ethernet and Wi-Fi
communications devices. They also support upload/download programming capability via the Internet. This
allows site maintenance independent of Central Station monitoring, and modification to sites globally via the
Internet. Refer to the Quick Installation Guide (p/n 800-21668) for information regarding programming and
registration. Additionally, an internal Z-Wave module allows the Lyric Gateway to support Home Automation
functions. (refer to the Gateway User Reference Guide (p/n 800-21670 for additional information.) The Gateway
is compatible with the following AlarmNet Communication Modules:
The
The LYRIC
The
The
LYRIC
LYRIC- - - - CDMA
LYRIC
CDMA Communications Module is only available in the continental United States,
CDMA
CDMA
Alaska and Hawaii
Alaska and Hawaii. . . .
Alaska and Hawaii
Alaska and Hawaii
Model
Model
Model
Model
LYRIC-3G/ LYRIC-3GC
LYRIC-CDMA
LYRICLTE Series
Communications Module 24
Communications Module
Communications Module
Communications Module
If 24-hour standby is required, the Super High Capacity battery (p/n 300-03866-AIO) must be installed.
WARNING: The
WARNING: The
WARNING: The Lyric Gateway
WARNING: The
(20 cm) from all persons and not co- - - - located or operated in conjunction with any other transmitter
(20 cm) from all persons and not co
(20 cm) from all persons and not co
(20 cm) from all persons and not co
except in accordance w
except in accordance w
except in accordance w
except in accordance wi i i i th FCC
The Communications Module must be registered with AlarmNet 360
The Communications Module must be registered with AlarmNet 360
The Communications Module must be registered with AlarmNet 360
The Communications Module must be registered with AlarmNet 360
alarm reporting can take place.
alarm reporting can take place.
alarm reporting can take place.
alarm reporting can take place.
Install
Install and Configur
Install
Install
and Configure e e e C C C C ommunication
and Configur
and Configur
Follow the steps and refer to the figure to install the Communications Module.
Installing the Cellular
Installing the
Cellular Communications Module
Installing the
Installing the
Cellular
Cellular
1.
At the AN360 app's Installer Tools screen, select "Advanced".
2.
Select "Install Cellular Module" and follow the prompts displayed on the Smart Device or follow the steps
below.
3.
Remove Gateway upper cover (bezel).
4.
Remove the existing Cellular Communications Module (if installed).
Communications Module is only available in the continental United States,
Communications Module is only available in the continental United States,
Communications Module is only available in the continental United States,
Description
Description
Description
Description
GSM Cellular Communications Module
CDMA Cellular Communications Module
LTE (Series) Cellular Communications Modules
24- - - - Hour Standby Power
Hour Standby Power
24
24
Hour Standby Power
Hour Standby Power
Lyric Gateway
Lyric Gateway must be installed to provide a separation distance of at least 7.8 in
Lyric Gateway
must be installed to provide a separation distance of at least 7.8 in
must be installed to provide a separation distance of at least 7.8 in
must be installed to provide a separation distance of at least 7.8 in
located or operated in conjunction with any other transmitter
located or operated in conjunction with any other transmitter
located or operated in conjunction with any other transmitter
th FCC and ISED
th FCC
th FCC
and ISED multi
and ISED
and ISED
ommunication Module
ommunication
ommunication
Communications Module
Communications Module
Communications Module
RF Exposure
RF Exposure
RF Exposure
RF Exposure
multi- - - - transmitter product procedures.
multi
multi
transmitter product procedures.
transmitter product procedures.
transmitter product procedures.
Module
Module
Module
- 10 -
TM
TM
TM
TM
before downloading or
before downloading or
before downloading or
before downloading or
Advertisement
Table of Contents
