System Settings; Brightness/Volume; Wi-Fi (Network) Configuration - Honeywell Lyric LCP300-L User Reference Manual

Brightness/Volume

Home > Settings Home > Settings Home > Settings Home > Settings
Adjust voice and system sounds with the Volume slider. System sounds include zone alert chimes
and countdown beeps.
Adjust the Gateway touchpad brightness with the Brightness slider.
NOTE NOTES S S S : • • • • As the sliders move, the Gateway previews changing volume and brightness levels. NOTE NOTE
• • • • Voice annunciations are controlled by enabling or disabling Chimes.

Wi-Fi (Network) Configuration

Home > Security > Tools > Home > Security > Tools > enter Master User Code > Netw
Home > Home > Security > Tools > Security > Tools >
Manage your system's router here. Remember that the Gateway, all mobile devices used to
operate the Gateway and all Wi-Fi cameras must be on the same network.
To View or Join Available Wi-Fi Networks
1. On the Tools menu, select Network
options appears.
2. Press Scan Access Points Scan Access Points. A list of available networks is displayed. Use the up and
Scan Access Points Scan Access Points
down arrows to scroll through the list. Press
3. Select the desired network and press Edit
password is required, press Key
4. Press Save Save. Save Save
5. Press JOIN JOIN JOIN JOIN.
6. Press to return to the previous screen.
Manually Configure Access Point
The Security setting below must match the security protocol used by your network
1. On the list of Wi-Fi options, press Manual Config AP
appears. (Fields include Network Type
2. Press SSID Name SSID Name SSID Name. SSID Name
3. Enter the network's name.
4. Press Save Save.
Save Save
5. Press Security Security.
Security Security
6. Choose the same security protocol as your router. Options include Open
and WPA2 WPA2 WPA2. (WEP is not supported.) WPA2
7. If a password is required, press Key

System Settings

enter Master User Code > Network
enter Master User Code > Netw enter Master User Code > Netw
Network Config Network Network Config Config Config then Configure Network
Edit Edit. The network information is displayed. If a Edit
Key and enter the password.
Key Key
IMPORTANT IMPORTANT
IMPORTANT IMPORTANT
router.
Manual Config AP Manual Config AP. The Wi-Fi enrollment menu Manual Config AP
Network Type, which cannot be changed.)
Network Type Network Type
Key, and enter the password.
Key Key
45
ork Config Config
ork ork Config Config
Configure Network. A list of Wi-Fi Configure Network Configure Network
to return to the previous screen.
Open, wpa/wpa2 Open Open wpa/wpa2 wpa/wpa2 wpa/wpa2