Udp Port - NetComm NTC-6908 User Manual

SM S Configuration n for Redirection
Inco ming text messages can be redirected to
Red direct to Mobile e
You can forward incomin ng text messages to a
dele te the number in the 'Redirect to Mobile"
For E Example: If someone e sends a text messag
Red direct to TCP & & TCP Port, Re
You can also forward inc coming text message
mes sage.
The TCP/UDP address ca an be an IP address
For E Example: If someone e sends a text messag
at th e same time.
SM S Configuration n for Remote Dia
Ena able Remote Di iagnostics
Enab ble or disable the Re mote Diagnostics fea
If Re emote Diagnostics co ommands are found,
Please note e: It is possible to adj
operation.
It is highly rec commended to enab
YML L6908
www w.netcommwireless.c com
47
o another mobile dev ice and/or a TCP/UD DP message server.
a different destination n number. This destin nation number can b
field and click the "S Save" button.
ge and Redirect to M Mobile is set to "04123 345678", this text me
direct to UDP & UDP Port
s to a TCP/UDP base ed destination. The T TCP or UDP server ca
or domain name. Th e port number range e is from 1 to 65535. P
ge and Redirect to T CP is set to "192.168 8.20.3" and "2002", th
agnostics
ature. If this setting is s enabled all incomin ng text messages are
the router executes t those commands. Th his feature is disabled
ust settings and prev vent your router from functioning correctly
ble security when utili sing this feature.
e another mobile pho one or 3G router pho
essage is stored on th he router and forward
an be any kind of pub blic or private server
Please refer to your T TCP/UDP based SMS
his text message is s tored in the router an
e parsed and tested f or if they contain Rem
d by default.
y. If this occurs, you w will need to perform a
one number. To disab ble the feature, simply y
ded to "0412345678" " at the same time.
if the server accepts s incoming text-based d
S server configuration n for which port to us e.
nd forwarded to "192 .168.20.3" on port "2 2002"
mote Diagnostics com mmands.
a factory reset in ord er to restore normal
NTC-6000 Series U User Guide