Advertisement
M2M CDMA Remote Firmware Upgrade/Downgrade Using TR-
069
Preparing the device firmware
Step 1 - Upload the device firmware to an external FTP/HTTP Server.
In this example, the following firmware file links are used:
http://xxx.xxx.x.x/ntc_nwl11_1.10.28.43604.cdi
http://xxx.xxx.x.x/ntc_nwl11_1.10.28.43604_r.cdi
Note: You should use your active FTP/HTTP server link and relevant device firmware for creating device firmware download
links on the Auto Configuration Server.
The M2M CDMA Router holds two firmware image files, one is the recovery image file and the other is the main system image file.
When performing a device firmware upgrade, you should upgrade both firmware images, starting with the recovery image first
(named with the '_r' suffix) and then the main system image. Instructions on how to transfer device firmware to an FTP/HTTP server
are not covered in this white paper.
Step 2 - Create firmware 'Download' entries.
Navigate to Home > Manage Download > Add Download to add two 'Download' entries. See Figure 10 and Figure 11 for details.
www.netcommwireless.com
Figure 10: Create firmware link for M2M CDMA 1.10.28.43604 recovery system image
for main system image
for recovery system image
M2M CDMA Router – TR-069 Whitepaper
11
Advertisement
