NetComm NTC-6908 User Manual page 20

Enter PUK Code
If after three incorrect attempts at entering the PIN code, you will be requested to enter a PUK code.
The PUK code is sometimes referred to as a PIN Unlocked Key (PUK) code. You will need to contact your mobile broadband provider to obtain this number.
Your mobile broadband provider will issue you a PUK code which will enable you to unlock the SIM card and enter a new PIN code.
Enter the new PIN and PUK codes as shown below and click Save.
If you have entered the PUK correctly you should see the following message:
Now click on the "Status" menu item at the top left-hand side of the page. It should reflect the screenshot below and show a SIM Status of 'SIM OK':
NTC-6000 Series – Industrial M2M Wireless Routers
20
www.netcommwireless.com
NETCOMM CALLDIRECT™ SERIES – NTC-6000
Figure 24: Enter Correct PIN and PUK Message
Figure 27: PUK Code Correctly Entered Response
Figure 28: Status ‐ PIN Unlocked
Series
YML6908