NetComm NTC-6908 User Manual page 63

The second step is to upload and install the main system software image. To do this, open your web browser (e.g. Internet Explorer/Firefox/Safari) and navigate to http://192.168.20.1/
Click "Login" and type "root" in the Username and "admin" in the Password fields (without quotes). Then click on "Submit".
The banner at the top of the page should now be different to show that the router is currently in recovery console mode.
Figure 80: NTC‐6908 Recovery Console Banner
To upload the main system software, click on "Application Installer" from the menu at the top of the page and then click on the browse button and navigate to where the main system image
upgrade file is located on your computer.
Figure 81: System ‐ Load/Save ‐ Upload Firmware
Once you have selected the recovery image file to use, click Upload to upload the file. You will then see a progress bar as shown in the screenshot below. The upload has finished when the
status bar reaches 100% and the "Phase:" has changed to Complete.
When the upload has completed, the screen should refresh and list the file you have just uploaded. Click on the "Install" link to the right of this.
Figure 82: Uploading Main Firmware Image
Figure 84: Recovery Console‐ Firmware Uploading Example
Once you see "Done" shown as per the screenshot below, click on "Reboot" at the top of the page and then click the "Reboot" button to restart the router
Figure 85: Main Firmware Image ‐ Done Message
YML6908 NTC-6000 Series User Guide
www.netcommwireless.com
63