NetComm NTC-6908 User Manual page 50

SM S Diagnostics a and Command E
Ena able Authentica ation
Enab ble or disable checki ng the sender's phon
If au thentication is enable ed, the router will che
in th e "White List" for the corresponding send
If the e number does not ex xist in "White List" or
This is enabled by defau lt.
It is highly reco mmended to enable
Sen nd Ack. SMS fo or Set Comman
Enab ble or disable sendin ng an acknowledge m
If dis sabled the router doe es not send any ackn
disa bled by default.
Sen nd Ack. SMS to o
Sele ct the destination to send an acknowledg
If "Fi xed Ack. SMS Numb ber" is selected, the a
If the e SMS Sender Numb ber is selected, the ac
NTC C-6000 Series – Indus strial M2M Wireless R
50
www w.netcommwireless.c com
Execution Setup p
Figure 68: Servic ces ‐ SMS – Diagnos
ne number against th he allowed sender "W White List" for incomin
eck if the sender's nu umber exists in the "W White List". If it exists
ding number. If they m match, the Diagnostic cs/Command is exec
the password does not match, the router r does not execute th
security when utilisin ng the Diagnostics/Co ommand Execution f
nd
message after execut tion of a "Set" comma and.
nowledgement after e execution of a "Set" c command. This can b
gement message to a after the execution of f a "Set" command.
acknowledgement m essage will be sent t to the predefined num
cknowledgement mes ssage will be sent to
Routers
NETCOMM CALLDIRECT™ SERIES – NTC
tics and command E Execution Setup
ng Diagnostics/Comm mand Execution SMS
s, the router then che cks the password in
cuted.
he incoming Diagnost tics/Command Execu
feature.
be useful to determin e if a command was
mber in the "Fixed Ac ck. SMS Number" fiel
sender directly. The default setting is to u use "SMS Sender Nu
C-6000 Serie s
S messages.
the incoming messa ge against the passw word
ution SMS message.
received and execut ted by the router. Thi
ld.
umber".
YML6908
s is