NetComm NTC-6908 User Manual page 34
Industrial hspa cellular network router calldirect ntc-6000 series
Hide thumbs
Also See for NTC-6908:
- Quick start manual (18 pages) ,
- User manual (63 pages) ,
- User manual (117 pages)
Table of Contents
Advertisement
Remote IPSec Gateway
Remote Address/Net to Join
Remote Address/Net Mask
Local Address/Net to Join
Local Address/Net Mask
DPD Keep Alive Time
NTC-6000 Series – Industrial M2M Wireless Routers
34
www.netcommwireless.com
ITEM
Profile Type
Set this option to IPSec.
Enable VPN
Enable or Disable the VPN connection.
Profile Name
A name that can be used to identify the VPN connection.
The IP address that the IPSec server is running on.
Click this to configure the VPN connection for Road Warrior (connection from a dynamic IP Address) use.
Road Warrior
Enter the Remote IP address or Network for use on the VPN connection.
Enter the subnet mask in use on the remote network.
Enter the Local IP address or Network for use on the VPN connection.
Enter the subnet mask in use on the local network.
Encap Protocol
Select the encapsulation protocol to use with the VPN connection.
IKE Mode
Select the IKE mode to use with the VPN connection.
Select whether or not to use PFS (Perfect Forward Secrecy) for the VPN connection. This feature will make sure
the same key is not generated twice and forces a new diffie-hellman key exchange. Both VPN endpoints must
PFS
support this function in order for it to work.
IKE Encryption
Select the IKE (IPSec Key Exchange) encryption type to use with the VPN connection.
IKE Hash
Select the IKE Hash type to use for the VPN connection.
IPSec Encryption
Select the IPSec encryption type to use with the VPN connection.
IPSec Hash
Select the IKE Hash type to use for the VPN connection.
DH Group
Select the Diffie-Hellman group the VPN tunnel will use.
Select the appropriate DPD (Dead Peer Detection) Action to use when the VPN tunnel detects a peer dropping
DPD Action
the VPN tunnel connection.
Enter the time in seconds for DPD to keep alive.
DPD Timeout
Enter the time in seconds for DPD to timeout.
IKE Rekey Time
Enter the appropriate IKE Rekey time for the VPN connection.
Enter the appropriate SA (Security Association) Life time for the VPN connection.
SA Life Time
Select the type of key mode in use for the VPN connection. You can select from: Pre Shared Key, RSA Keys or
Key Mode
Certificates
Table 9: Internet Settings ‐ VPN – IPSec Details
NETCOMM CALLDIRECT™ SERIES – NTC-6000
DEFINITION
Series
YML6908
Hide quick links:
Advertisement
Table of Contents
