Commands And; Commands; Commands Menu; Virtual Inputs - GE D30 Instruction Manual

7 COMMANDS AND TARGETS
7 COMMANDS AND TARGETS 7.1COMMANDS
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
The commands menu contains relay directives intended for operations personnel. All commands can be protected from
unauthorized access via the command password; see the Password Security section of chapter 5 for details. The following
flash message appears after successfully command entry:
PATH: COMMANDS

VIRTUAL INPUTS

COMMANDS

VIRTUAL INPUTS
MESSAGE
The states of up to 64 virtual inputs are changed here. The first line of the display indicates the ID of the virtual input. The
second line indicates the current or selected status of the virtual input. This status will be a state off (logic 0) or on (logic 1).
PATH: COMMANDS

CLEAR RECORDS

COMMANDS
CLEAR RECORDS
GE Multilin
COMMANDS
COMMANDS
VIRTUAL INPUTS
COMMANDS
CLEAR RECORDS
COMMANDS
SET DATE AND TIME
COMMANDS
RELAY MAINTENANCE
COMMANDS
PMU ONE-SHOT
COMMAND
EXECUTED
Virt Ip 1
Off
↓
↓
Virt Ip 64
Off
CLEAR FAULT REPORTS?
No
CLEAR EVENT RECORDS?
No
CLEAR OSCILLOGRAPHY?
No
CLEAR BREAKER 1
ARCING AMPS? No
D30 Line Distance Relay
7.1 COMMANDS

7.1.1 COMMANDS MENU

7.1.2 VIRTUAL INPUTS
Range: Off, On
Range: Off, On
7.1.3 CLEAR RECORDS
Range: No, Yes
Range: No, Yes
Range: No, Yes
Range: No, Yes
7
7-1