Faceplate Interface; Faceplate - GE D30 Instruction Manual

4.2 FACEPLATE INTERFACE

4.2FACEPLATE INTERFACE
The front panel interface is one of two supported interfaces, the other interface being EnerVista UR Setup software. The
front panel interface consists of LED panels, an RS232 port, keypad, LCD display, control pushbuttons, and optional user-
programmable pushbuttons.
The faceplate is hinged to allow easy access to the removable modules. There is also a removable dust cover that fits over
the faceplate which must be removed in order to access the keypad panel. The following figure shows the horizontal
4
arrangement of the faceplate panels.
LED panel 1
Front panel
RS232 port
Small user-programmable
(control) pushbuttons 1 to 7
The following figure shows the vertical arrangement of the faceplate panels for relays ordered with the vertical option.
4-4
LED panel 2
User-programmable
pushbuttons 1 to 12
Figure 4–2: UR-SERIES HORIZONTAL FACEPLATE PANELS
MENU 7 8
HELP MESSAGE 4 5
ESCAPE 1 2
.
ENTER VALUE 0
STATUS EVENT CAUSE
IN SERVICE VOLTAGE
TROUBLE CURRENT RESET
TEST MODE FREQUENCY
TRIP OTHER USER 1
ALARM PHASE A
PICKUP PHASE B USER 2
PHASE C
NEUTRAL/GROUND USER 3
Figure 4–3: UR-SERIES VERTICAL FACEPLATE PANELS
D30 Line Distance Relay
LED panel 3
DISPLAY
9
6
KEYPAD
3
+/-
LED PANEL 3
LED PANEL 2
LED PANEL 1
4 HUMAN INTERFACES

4.2.1 FACEPLATE

Display
Keypad
827801A7.CDR
GE Multilin