GE L90 Instruction Manual page 125
Line current differential system
Hide thumbs
Also See for L90:
- Instruction manual (832 pages) ,
- Communications manual (532 pages) ,
- Instruction manual (470 pages)
Table of Contents
Advertisement
CHAPTER 3: INSTALLATION
3.
Click on the LAN Settings button to open the following window.
4.
Ensure that the "Use a proxy server for your LAN" box is not checked.
If this computer is used to connect to the Internet, re-enable any proxy server settings after the computer has been
disconnected from the L90 relay.
1.
Start the Internet Explorer software.
2.
Select the UR device from the EnerVista Launchpad to start EnerVista UR Setup.
3.
Click the Quick Connect button to open the window.
4.
Select the Ethernet interface and enter the IP address assigned to the L90, then click the Connect button. The
EnerVista UR Setup software creates a site named "Quick Connect" with a corresponding device also named "Quick
Connect" and displays them on the left side of the screen.
5.
Expand the sections to view data directly from the L90 device.
Each time that the EnerVista UR Setup software is initialized, click the Quick Connect button to establish direct
communications to the L90. This ensures that configuration of the EnerVista UR Setup software matches the L90 model
number.
When direct communications with the L90 via Ethernet is complete, make the following changes:
1.
From the Windows desktop, right-click the My Network Places icon and select Properties to open the network
connections window.
2.
Right-click the Local Area Connection icon and select the Properties item.
L90 LINE CURRENT DIFFERENTIAL SYSTEM – INSTRUCTION MANUAL
ADD DEVICE TO SOFTWARE
3-57
3
Advertisement
Table of Contents
