Restricted Ground Fault; Transducer Inputs And Outputs; Distance - GE L90 Instruction Manual

CHAPTER 6: ACTUAL VALUES

6.4.14 Restricted ground fault

ACTUAL VALUES  METERING  RESTRICTED GROUND FAULT CURRENTS  RESTRICTED GROUND FAULT 1(4)
 RESTRICTED
 GROUND FAULT 1
This menu displays the differential and restraint current values for the restricted ground fault element.

6.4.15 Transducer inputs and outputs

ACTUAL VALUES  METERING  TRANSDUCER I/O DCMA INPUTS  DCMA INPUT xx
 DCMA INPUT xx

Actual values for each DCmA input channel that is enabled are displayed with the top line as the programmed channel ID
and the bottom line as the value followed by the programmed units.
ACTUAL VALUES  METERING  TRANSDUCER I/O RTD INPUTS  RTD INPUT xx
 RTD INPUT xx

Actual values for each RTD input channel that is enabled are displayed with the top line as the programmed channel ID
and the bottom line as the value.

6.4.16 Distance

ACTUAL VALUES  METERING  DISTANCE
 DISTANCE

L90 LINE CURRENT DIFFERENTIAL SYSTEM – INSTRUCTION MANUAL
RGF 1 DIFF Igd:

0.000 A
RGF 1 RESTR Igr:

0.000 A
DCMA INPUT xx

0.000 mA
RTD INPUT xx

-50 °C
AB LOOP RESISTANCE

RAB: 0.00 Ohms
AB LOOP REACTANCE

XAB: 0.00 Ohms
AB LOOP IMPEDANCE

ZAB: 0.00 Ohms
AB LOOP IMPEDANCE

ANGLE: 0.00 DEG
BC LOOP RESISTANCE

RBC: 0.00 Ohms
BC LOOP REACTANCE

XBC: 0.00 Ohms
BC LOOP IMPEDANCE

ZBC: 0.00 Ohms
BC LOOP IMPEDANCE

ANGLE: 0.00 DEG
CA LOOP RESISTANCE

RCA: 0.00 Ohms
CA LOOP REACTANCE

XCA: 0.00 Ohms
CA LOOP IMPEDANCE

ZCA: 0.00 Ohms
METERING
6
6-27