MachMotion Apollo III Manual page 37

P a g e | 37
FIGURE 42 CYCLE START
Now whenever Input4 is active, E-Stop will be flagged.
User
FIGURE 43 - MACHMOTION PLUGIN, USER DEFINED MESSAGES
The User Messages can be configured to have custom messages displayed. Each input will do a specific function
(E-Stop, feed hold, stop) and write to the status bar except the No Action option. The No Action just displays the
message on the status bar whenever the input is active. In the example below, when OEM trigger 4 is activated,
the message "MCR Reset!" will be displayed on the status bar.
FIGURE 44 USER MESSAGES
Apollo III Using Mach3