Mist And Flood Control; Advanced Options - MachMotion Apollo III Manual

The outputs can also be accessed inside the MachMotion plugin. Read Mist and Flood Control
Advanced Options on page 35 for more information on how to use outputs inside the plugin.

6.5 Mist and Flood Control

Mist is already preconfigured in Mach3 to be wired into Y0 on the small green connector.
Feature
Mist
Flood

7 ADVANCED OPTIONS

A number of advanced features can be accessed and configured in the MachMotion plugin such as periodic oiler
control and custom user messages. Begin by going to PlugIn Control->MachMotion Config to open the
MachMotion plugin.
Custom M-Codes
M200
M201
M202
M203
M204
M205
M206
M207
M208
M209
M210
M211
TABLE 6 M-CODES FOR OUTPUTS
ON M-Code OFF M-Code
M7
M8
TABLE 7 MIST AND FLOOD CONTROL
Apollo III Using Mach3
Functions Default Output
Output 5 on
Output 5 off
Output 6 on
Output 6 off
Output 7 on
Output 7 off
Output 8 on
Output 8 off
Output 9 on
Output 9 off
Output 10 on
Output 10 off
Preconfigured Output
Output 3 - Y0
M9
Output 4 - Y1
Y2
Y3
Y4
Y5
Y6
Y7
P a g e | 35