Status Leds - MachMotion Apollo III Manual

10 | P a g e

1.4 Status LEDs

The Apollo III has four status LEDs that show the status of the controller's processor. The LEDs are located close to
the center of the controller. See the figure below.
Color Label
Green PWR
Orange CTRL
Red ERR
Green CPU
Figure 2 Status LEDs
Function
Power is supplied to Apollo III
Apollo III has an enable signal from control
Apollo III has an error
Apollo III CPU is running (should be flashing when power is supplied)
TABLE 1 - APOLLO III STATUS LEDS
Apollo III Using Mach3