Expansion Cards And Expansion Card Riser; Expansion Card Installation Guidelines; Removing An Expansion Card From Expansion Card Riser 2 Or 3 - Dell E31S Series Owner's Manual

Hide thumbs Also See for E31S Series:
Table of Contents

Advertisement

Related tasks
Before working inside your system
Removing the cooling shroud
Removing expansion card risers
Installing expansion card risers
Installing the cooling shroud
After working inside your system
Related reference
Safety instructions

Expansion cards and expansion card riser

An expansion card in the server is an add-on card that can be inserted into an expansion slot on the system board or riser card to add
enhanced functionality to the system through the expansion bus.
NOTE:
A System Event Log (SEL) event is logged if an expansion card riser is unsupported or missing. It does not
prevent your system from turning on and no BIOS POST message or F1/F2 pause is displayed.

Expansion card installation guidelines

Depending on your system configuration, the following PCI Express (PCIe) generation 3 expansion cards are supported:
Table 33. Supported expansion cards
PCIe slot
Riser
1
1
2
1
3
1
4
2
5
2
6
3 (alternate)
NOTE:
To use PCIe slots 1 through 4 on the risers 1 and 2, both the processors must be installed.
NOTE:
The expansion card slots are not hot-swappable.
The following table provides guidelines for installing expansion cards to ensure proper cooling and mechanical fit. The expansion cards with
the highest priority should be installed first using the slot priority indicated. All the other expansion cards should be installed in the card
priority and slot priority order.
NOTE:
Ensure that the 100 G OPA x16 card is installed in slot 6 (x16 PCIe) on the alternate riser 3.
Removing an expansion card from expansion card riser 2 or
3
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow
the safety instructions that are shipped with your product.
88
Installing and removing system components
Processor connection
Processor 2
Processor 2
Processor 2
Processor 2
Processor 1
Processor 1
Height
Length
Low Profile
Half Length
Low Profile
Half Length
Low Profile
Half Length
Full Height
Full Length
Full Height
Full Length
Full Height
Full Length
Link width
Slot width
x8
x16
x8
x16
x8
x16
x16
x16
x8
x16
x16
x16

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dr4300e

Table of Contents