Oscillography; Data Logger - GE N60 Instruction Manual

RECORDS

6.5.3 Oscillography

6.5.3.1 Enhanced and standard front panels
ACTUAL VALUES  RECORDS  OSCILLOGRAPHY
 OSCILLOGRAPHY

6
This menu allows the user to view the number of triggers involved and number of oscillography traces available. The cycles
per record value is calculated to account for the fixed amount of data storage for oscillography. See the Oscillography
section of chapter 5 for details.
A trigger can be forced here at any time by setting "Yes" to the FORCE TRIGGER? command. See the
menu for information on clearing the oscillography records.
RECORDS

6.5.4 Data logger

ACTUAL VALUES  RECORDS  DATA LOGGER
 DATA LOGGER

The
OLDEST SAMPLE TIME
full, at which time it starts counting at the defined sampling rate.
The
NEWEST SAMPLE TIME
rate. If the data logger channels are defined, then both values are static.
See the
COMMANDS  CLEAR RECORDS
6-28
Figure 6-6: Event record
FORCE TRIGGER?

No
NUMBER OF TRIGGERS:

0
AVAILABLE RECORDS:

0
CYCLES PER RECORD:

0
LAST CLEARED DATE:

2000/07/14 15:40:16
OLDEST SAMPLE TIME:

2000/01/14 13:45:51
NEWEST SAMPLE TIME:

2000/01/14 15:21:19
represents the time at which the oldest available samples were taken. It is static until the log gets
represents the time the most recent samples were taken. It counts up at the defined sampling
menu for clearing data logger records.
N60 NETWORK STABILITY AND SYNCHROPHASOR MEASUREMENT SYSTEM – INSTRUCTION MANUAL
CHAPTER 6: ACTUAL VALUES
Range: No, Yes
COMMANDS  CLEAR