GE N60 Instruction Manual page 227

CHAPTER 5: SETTINGS
STATUS INPUTS 1 to 16
Range: OFF, ON, any FlexLogic operand
Default: OFF
This setting identifies the potential inputs for use in the STATUS INDEX fields, for display of the status of FlexLogic
operands.
A maximum of eight Status Inputs can be used per metering page, and 16 in all metering pages.
Select the metering input from the drop-down list. The options reflect the FlexLogic operands applicable to the N60.
They are inputs for all five metering pages, not just the current page.
N60 NETWORK STABILITY AND SYNCHROPHASOR MEASUREMENT SYSTEM – INSTRUCTION MANUAL
Figure 5-8: Metering Editor window
Figure 5-9: Preview for graphical front panel
PRODUCT SETUP
5
5-33