METERING
6.4.2 Sources
6.4.2.1 Menu
ACTUAL VALUES METERING SOURCE SRC 1
SOURCE SRC 1
This menu displays the metered values available for each source.
Metered values presented for each source depend on the phase and auxiliary VTs and phase and ground CTs assignments
6
for this particular source. For example, if no phase VT is assigned to this source, then any voltage, energy, and power
values are unavailable.
6.4.2.2 Phase current metering
ACTUAL VALUES METERING SOURCE SRC 1 PHASE CURRENT
PHASE CURRENT
SRC 1
6-16
PHASE CURRENT
SRC 1
GROUND CURRENT
SRC 1
PHASE VOLTAGE
SRC 1
AUXILIARY VOLTAGE
SRC 1
POWER
SRC 1
ENERGY
SRC 1
DEMAND
SRC 1
FREQUENCY
SRC 1
CURRENT HARMONICS
SRC 1
VOLTAGE HARMONICS
SRC 1
SRC 1 RMS Ia: 0.000
b: 0.000 c: 0.000 A
SRC 1 RMS Ia:
0.000 A
SRC 1 RMS Ib:
0.000 A
SRC 1 RMS Ic:
0.000 A
SRC 1 RMS In:
0.000 A
SRC 1 PHASOR Ia:
0.000 A
0.0°
SRC 1 PHASOR Ib:
0.000 A
0.0°
SRC 1 PHASOR Ic:
0.000 A
0.0°
N60 NETWORK STABILITY AND SYNCHROPHASOR MEASUREMENT SYSTEM – INSTRUCTION MANUAL
CHAPTER 6: ACTUAL VALUES
See below
See page 6-17
See page 6-17
See page 6-18
See page 6-18
See page 6-19
See page 6-19
See page 6-20
See page 6-21
See page 6-21