Pmu Aggregator - GE N60 Instruction Manual

Network stability and synchrophasor
Hide thumbs Also See for N60:
Table of Contents

Advertisement

CHAPTER 6: ACTUAL VALUES
These actual values display without the corresponding time stamp as they become available per the recording rate
setting. Also, the recording post-filtering setting is applied to these values.

6.4.14 PMU aggregator

ACTUAL VALUES  METERING  PHASOR MEASURMENT UNIT  PMU AGGREGATOR 1(4)
 PMU AGGREGATOR 1
Actual values for the IEC 61850-90-5 PDU size are provided. These values allow you to know the approximate Ethernet
frame size for the data streams from each aggregator. This can help to estimate network loading. The PDU size shown in
the displays does not include the Ethernet, UDP, or IP layers. PDU sizes approaching approximately 1500 bytes result in
fragmented data frames, causing increased network traffic.
N60 NETWORK STABILITY AND SYNCHROPHASOR MEASUREMENT SYSTEM – INSTRUCTION MANUAL
PMU 1 VB:
0.000 V
0.00°
PMU 1 VC:
0.000 V
0.00°
PMU 1 VX:
0.000 V
0.00°
PMU 1 V1:
0.000 V
0.00°
PMU 1 V2:
0.000 V
0.00°
PMU 1 V0:
0.000 V
0.00°
PMU 1 IA:
0.000 A
0.00°
PMU 1 IB:
0.000 A
0.00°
PMU 1 IC:
0.000 A
0.00°
PMU 1 IG:
0.000 A
0.00°
PMU 1 I1:
0.000 A
0.00°
PMU 1 I2:
0.000 A
0.00°
PMU 1 I0:
0.000 A
0.00°
PMU 1 FREQUENCY:
0.000 Hz
PMU 1 df/dt:
0.00 Hz/s
PMU 1 CONFIG CHANGE
COUNTER:
PMU AGGREGATOR 1
PDU SIZE: 0
Range: Va or Vab per VT bank connection
Range: Va or Vab per VT bank connection
Range: Substituted with zero if delta-connected VTs
Range: 0 to 65535
0
METERING
6
6-25

Advertisement

Table of Contents
loading

Table of Contents