Table of Contents
Advertisement
Profile Series v.G1.5 Mortise Exit Device
Installation Instructions: 8977/8978 Mortise Exit Device
7
Step #1 – Prepare Door
A. Verify Hand and Bevel of Door
• This device is non-handed.
• Door should be fitted and hung.
• Verify box label for size of exit device and function.
B. Door Preparation
Prior to installation, all holes must be free of burrs, debris and sharp edges.
Prepare door according to appropriate template:
• Exit installation instructions A6770
• Wood door template A7457 ships with product.
• Door manufacturer's template 4641 (metal and wood)
Hole for Ribbon Cable from
Controller to Keypad
Inside of Cylinder Hole
Thumb Turn Lever Hole
Lever Handle Hole
Outside of Door
Mortised
Pocket
Pre-drilled and/or
Tapped Holes (2 places)
1-800-810-WIRE • www.sargentlock.com • A7856C
Inside
Left Hand
Reverse Bevel
Outside
"LHRB"
Fig. 1A
Inside of Door
Right Hand
Reverse Bevel
"RHRB"
Through-bolt Hole
Outside Cylinder Hole
(76 and 78 Functions)
Lever Handle Hole
15
Hide quick links:
Advertisement
Table of Contents
