Guarantee, Service, Repairs And Maintenance - Tele Radio TG-TX-MNL6 User Instruction

REMOVAL OF INTERNAL BATTERY
I MPORTANT! Electronics and batteries must be physically separated before disposal. Make
sure that electronics or batteries are not thrown in the household waste.
1. Remove the clip. Remove the rubber cover by hand. Use a screwdriver to unscrew the 2
screws.
2. Use a screwdriver to unscrew the 4 screws. Remove the front encapsulation by hand. Turn the
transmitter around, so that the buttons face up.
3. Use a screwdriver to unscrew the screw in the middle of the transmitter. Lift the circuit board
up by hand.
4. The battery pack is placed behind the circuit board. Remove the battery by hand.

GUARANTEE, SERVICE, REPAIRS AND MAINTENANCE

The Tele Radio AB products are covered by a guarantee/warranty against material, construction
and manufacturing faults. During the guarantee/warranty period, Tele Radio AB may replace the
product or faulty parts. Work under guarantee/warranty must be carried out by Tele Radio AB or
by an authorized service centre specified by Tele Radio AB.
This is not covered by the guarantee/ warranty:
Faults resulting from normal wear and tear
n
Parts of a consumable nature
n
Products that have been subject to unauthorized modifications
n
Faults resulting from incorrect installation and use
n
Damp and water damage
n
Maintenance:
Repairs and maintenance must be carried out by qualified personnel
n
Use spare parts from Tele Radio AB only
n
Contact your representative if you require service or other assistance
n
Keep the product in a dry, clean place
n
Keep contacts and antennas clean
n
Wipe off dust using a slightly damp, clean cloth
n
IMPORTANT! Never use cleaning solutions or high-pressure water.
- 19 -