Automatically Feeding Envelopes (Dm400C) - Pitney Bowes DM300C Operator's Manual

Processing Letter Mail (cont'd)

Automatically Feeding Envelopes (DM400c)

1. Tap lead edges and top edges of envelopes on table.
2. Shingle envelopes (slant the stack as shown) so the bottom
envelope feeds first. All envelopes should be the same size.
3. Load envelopes onto the feeder with the flaps down and fac ing
the rear wall. Mail must contact the feed rollers.
4. Slide the side guide up to the envelopes. Leave space (about the
thickness of a dime) between the side guide and the envelopes
to ensure feeding is not restricted.
5. Press Start. The system automatically feeds the envelope, prints
the digital indicia and ejects the envelope.
SV62261 Rev. A
3 • Running Mail
Start
key
Side Guide
3-7