Settings For Connecting To The Data Center - Pitney Bowes DM300C Operator's Manual

6 • Adding Postage/Connecting to Data Center
Downloading Files or Updating System (cont'd)
6. After the download has completed, a message stating so
displays.
A. If you need to reboot the system, the prompt "Restart Now"
displays. Select this to restart the system.
B. If no rebooting is necessary, simply select "Return Home" to
return to the Home screen.

Settings for Connecting to the Data Center

You can modify the con nec tion settings on your machine, from basic
phone settings (tone or pulse, dial prefix, etc.) to advanced settings
such as user ID, password, and server IP address.
IMPORTANT:
Do not change the Data Center settings un less directed to do so by
your Pitney Bowes representative.
LAN Connection Network Settings
Follow the steps below to ensure your LAN Internet connection is set
up properly. This procedure is necessary for typical (non-Firewall)
LAN Internet connections.
1. Press the Menu key.
2. Select "Data Center Options."
3. Select "Network Settings."
4. Verify that the "Get IP" menu option is set to "Auto."
5. Press the green down arrow and verify that the "MAC Addr" field
is populated. This indicates that the NIC Card is working.
6. Press the Enter key and then the Home key.
7. Check your Postage By Phone
LAN Internet connection is working. Refer to Checking Your
Postage By Phone® Account Balance in this chapter for more
information.
6-16
account balance to confirm your
®
SV62261 Rev. A