Power On Projector - Barco HDF W22 User And Installation Manual
Hdf series
Hide thumbs
Also See for HDF W22:
- Installation manual (381 pages) ,
- User and installation manual (333 pages) ,
- Use and installation manual (319 pages)
Table of Contents
Advertisement
5.3
Power on projector
How to power on.
1. Press the power switch at the back of the projector to switch on this projector.
Image 5-2
Main switch
-
When '0' is pressed, the projector is switched off.
-
When '1' is pressed, the projector is switched on.
The projector starts up in standby. The menus are accessible via the local LCD panel.
The start up screen is displayed on the local LCD panel and when fully started up, it changes to the overview screen.
This screen indicates :
-
the selected Main input
-
the selected PIP input
-
the IP address
-
the Customer Id
-
the Lamp status
-
the Mains voltage
-
the current ambient temperature
-
the Text status (OSD)
To display an image, the standby key must be pressed once.
The current mains input voltage is indicated on the voltmeter just above the power switch.
The background image of the startup screen and info screens can be changed with Projector Toolset with an
installed HDF series plug-in.
Lamp overview
Once the projector is started, press Lamp to get an overview of the lamp parameters such as :
R5905158 HDF SERIES 08/12/2016
5. Getting started
67
Advertisement
Table of Contents
