Wireless Access Points Selection And Setup - Barco HDF W22 User And Installation Manual

13.5.7 Wireless access points selection and setup

These menu items are only accessible when wireless network status is set to [on].
Scan for access points
1. Select Scan access points and press ENTER to start the scan.
Image 13-35
Scan access points
2. Use the ▲ or ▼ key to select the desired access point and press ENTER to activate.
The security type of the network is indicated with the radio button in front of Open or WPA/WPA2. The network name is also
indicated next to SSID.
Note : WEP is not supported.
Access to a wireless secured access point
1. Use the ▲ or ▼ key to select Passphrase.
For a secured network, a passphrase should be entered before getting access to the wireless network.
Image 13-37
Passprhrase, selection
R5905158 HDF SERIES 08/12/2016
Image 13-36
Scan access points, results
Image 13-38
Passphrase, entry
13. Projector Control
311