Rcu Battery Installation - Barco HDF W22 User And Installation Manual

3.1.1

RCU battery installation

Where to find the batteries for the remote control ?
The batteries are not placed in the remote control unit to avoid control operation in its package, resulting in a shorter battery life
time. At delivery the batteries can be found in a separated bag attached to the remote control unit. Before using your remote control,
install the batteries first.
How to install the batteries in the remote control ?
1. Push the battery cover tab with the fingernail a little backwards (1) and pull, at the same time, the cover upwards (2).
Image 3-2
2. Insert the two AA size batteries, making sure the polarities match the + and - marks inside the battery compartment.
Image 3-3
3. Insert (1) the lower tab of the battery cover in the gap at the bottom of the remote control, and press (2) the cover until it clicks
in place.
2
Image 3-4
C
AUTION
battery is replaced with an incorrect type.
C
AUTION
installed.
R5905158 HDF SERIES 08/12/2016
1
1
:
Replace with the correct battery type. Use two AA size batteries. There is a risk of explosion if the
:
Replace the battery as explained above. There is a risk of explosion if the battery is incorrectly
2
3. Physical installation
31