Keystone Correction Workflow - Barco HDF W22 User And Installation Manual

12.8.8 Keystone correction workflow
Adjusting vertical and horizontal keystone
1. Select the 2 x 2 adjustment level. See "Setting the warping level", page 237.
The default selected anchor point is the left top corner of the image.
2. Select the desired warp area.
Depending on the selected area only the points in that area will be adjusted.
3. Select keystone.
4. Select within Warp Adaptations, Horizontal or Vertical to adjust the corresponding keystone.
Or,
press ENTER when an item is selected and use the 4 arrow keys to adjust.
Image 12-43
Warping, keystone
5. Move the corner points to the desired position.
Image 12-44
Keystone adjustment
R5905158 HDF SERIES 08/12/2016
12. Alignment
241