About Flex, Light Output Control - Barco HDF W22 User And Installation Manual

13. Projector Control

13.15.1 About FLEX, Light output control

Overview
With the FLEX technology the projector owners can lock the light output to different levels. The locking can be done via 3 different
ways:
• Via Projector Toolset when connected via an Ethernet connection with the projector. See Projector Toolset's user guide
(R5905073, index 04), chapter "FLEX, light output control".
• Via the OSD menu of the projector itself
• Via an SMS message send to a projector equipped with an optional GSM board.
To lock to a specific value a 4 digit code is necessary; These codes can be created by the projector owner using Projector Toolset.
352 R5905158 HDF SERIES 08/12/2016