Selecting And Changing The Position Of A Specific Point - Barco HDF W22 User And Installation Manual

12.8.10 Selecting and changing the position of a specific point
About point selection
Depending on the warp level, number of selectable points, a specific point can be selected and moved in any direction. The coordi-
nate system works with 33 x 33 pixels (0 to 32). Depending on the warp level the cursor will jump from active point to active point.
E.g. for 5 x 5 the first point has coordinates (0,0), the second point in horizontal direction will have coordinates (12,0), etc. .
How to select a point
1. Select the warp level (1).
2
1
Image 12-46
Point selection
2. Select Warp mode points (2).
3. Use the ▲ or ▼ key to go to Point selection.
4. Select alternating the X and Y coordinate and change the value (3).
Or,
press ENTER to open the point selection window.
Use the 4 arrow keys to select the desired point.
Press ENTER to the Warping adaptations.
Image 12-47
Point selection
5. Use the 4 arrow keys to change the position of the selected point.
R5905158 HDF SERIES 08/12/2016
0 1 2 3 4 5 6 7 8 9 10
1 2
0
1
2
3
4
5
6
7
8
6 7
9
10
11
12
13
14
15
16 11 12
17
18
19
20
21
22
23
24
16 17
25
3
26
27
28
29
30
31
32
21 22
Image 12-48
Moving selected point
11 12 13 14 15 16 17 18 19 20 21 22 23 24
3 4
8 9
13 14
18
19
23 24
12. Alignment
25 26 27 28 29 30 31 32
5
10
15
20
25
243