Black Level Adjustment - Barco HDF W22 User And Installation Manual

12. Alignment

12.14.8 Black level adjustment

Why black level adjustment
For dark images, the overlap zone will be brighter then the rest of the images. Typically for DLP projectors, next to the overlap
zone, a brighter area is recognized. This area is known as a DLP leakage area. This area must also be exclude for the black level
adjustment. Therefore we can rise the black level of the remaining image (excluding the overlap zone and the DLP leakage area).
First, the width of the leakage area must be set. The white cursor line indicates the border of the overlap area. The green cursor
line indicates the current installed DLP leakage area border and starts at the position of the white cursor line (no width installed).
This green line can be moved to the border of the DLP leakage area with the cursor keys.
Image 12-143
DLP Leakage area set up
After the area is set, use TEXT key to remove the area border lines when adjusting the black level.
How to set the leakage area width
1. Press Menu to activate the menus and select Alignment → Scenergix → Black level.
Image 12-144
Main menu, alignment
278
Image 12-145
Alignment, Scenergix
R5905158 HDF SERIES 08/12/2016