Lamp Status - Barco HDF W22 User And Installation Manual

13. Projector Control
Image 13-116
Occurrence setup
Occurrence : the number of loops that will take place as set in the recurrence.
E.g; an occurrence of 2 with a recurrence of 3 means that the schedule will be executed at the start date, start date + 3 and due
to the occurrence (=2) also at start date + 6.
Layout selection
1. Select Set layout and press ENTER.
The Load layout menu opens with a list of the available layouts.
2. Use the ▲ or ▼ key to select the desired layout and press ENTER to link the layout to the task.
Image 13-117
Link layout

Lamp status

1. Select the desired lamp status and press ENTER to select.
The following lamp statuses are possible:
- Turn on : lamp will be switched on when the task is started.
- Turn off : lamp will be switched off when the task is started.
- No change : no changes to the lamp status when the task is started. The lamp remains in its current status.
Task name
1. Select Taskname and press ENTER to edit the current proposed name.
2. Use the ◄ or ► key to select the desired character to change.
Use the ▲ or ▼ key to change that character.
Note: Extra characters can be added at the end of the current displayed characters.
Creating the task
1. Select Apply and press ENTER to create the task.
The task is added to the list of tasks.
342 R5905158 HDF SERIES 08/12/2016