Inserting Oracle Database Appliance Into A Rack - Oracle Database Appliance X6-2-HA Owner's Manual

Inserting Oracle Database Appliance Into a Rack

Feature
Rack horizontal opening
and unit vertical pitch
Distance between front and
rear mounting planes
Clearance depth in front of
front mounting plane
Clearance depth behind
front mounting plane
Clearance width between
front and rear mounting
planes
Minimum clearance for
service access
Server node dimensions
Storage shelf dimensions
Caution -
bottom up so that it will not become top-heavy and tip over. Deploy your rack's anti-tilt bar to
prevent the rack from tilting during equipment installation. This caution is not applicable if an
earthquake kit has been installed on the rack and it is bolted to the floor.
Inserting Oracle Database Appliance Into a Rack
This section describes how to install an Oracle Database Appliance into a rack as follows:
"Inserting Oracle Database Appliance X6-2S/X6-2M/X6-2L Into a Rack" on page 63
■
62 Oracle Database Appliance Owner's Guide • March 2017
Oracle Database
Appliance Version 1
Conforms to ANSI/EIA
310-D-1992 or IEC 60927
standards.
Minimum 660.4 mm and
maximum 876.3 mm (26 in
to 34.5 in).
Distance to front cabinet
door is at least 25.4 mm (1
in).
Distance to rear cabinet
door is at least 700 mm
(27.5 in).
Distance between
structural supports and
cable troughs is at least
456 mm (18 in).
Front clearance: 123.2 cm
(48.5 in)
Rear clearance: 91 cm (36
in)
"Physical Specifications
for Oracle Database
Appliance Version 1 and
Models X3-2, X4-2 and
X5-2" on page 49
N/A
Personal injury or equipment damage. Always load equipment into a rack from the
Oracle Database Oracle Database
Appliance X3-2/X4-2 Appliance X5-2
Conforms to ANSI/EIA Conforms to ANSI/EIA
310-D-1992 or IEC 60927 310-D-1992 or IEC 60927
standards. standards.
Minimum 610 mm and Minimum 610 mm and
maximum 915 mm (24 in maximum 915 mm (24 in
to 36 in). to 36 in).
Distance to front cabinet Distance to front cabinet
door is at least 25.4 mm (1 door is at least 25.4 mm (1
in). in).
Distance to rear cabinet Distance to rear cabinet
door is at least 900 mm door is at least 900 mm
(35.43 in) with the cable (35.43 in) with the cable
management arm, or 800 management arm, or 800
mm (31.5 in) without the mm (31.5 in) without the
cable management arm. cable management arm.
Distance between Distance between
structural supports and structural supports and
cable troughs is at least cable troughs is at least
456 mm (18 in). 456 mm (18 in).
Front clearance: 123.2 cm Front clearance: 123.2 cm
(48.5 in) (48.5 in)
Rear clearance: 91 cm (36 Rear clearance: 91 cm (36
in) in)
"Physical Specifications "Physical Specifications
for Oracle Database for Oracle Database
Appliance Version 1 and Appliance Version 1 and
Models X3-2, X4-2 and Models X3-2, X4-2 and
X5-2" on page 49 X5-2" on page 49
"Physical Specifications "Physical Specifications
for Oracle Database for Oracle Database
Appliance Version 1 and Appliance Version 1 and
Models X3-2, X4-2 and Models X3-2, X4-2 and
X5-2" on page 49 X5-2" on page 49